Composite Moulding

An eggshell is perhaps the best-known natural composite.

Composite materials are basically highly engineered combinations of polymer resins and reinforcing materials such as glass fibers that are incredibly strong, durable, flexible and non-corrosive.

The term “composites” is used broadly to describe a large range of materials that have generic reinforcement. These are combined with various resins that can be used for a large number of applications and are thus ideal for highly engineered materials targeted at specific applications. They are rapidly replacing products made the more traditional way from alloys and other metals. As raw materials become more expensive, so composites become a much more attractive and cost-effective proposition.

The expertise of MTM Plastics is in composite moulding. Examples of this type of technology can be found in many different industries today. Aviation is one such area that has embraced composites technology, with over 57% of aircraft components being made by this process. The Mass Transit industry, globally, also has taken the composites philosophy on board. If you travel today anywhere in Europe by train, the seats you sit on may well have been manufactured by MTM Plastics.

Durability, weight and corrosion are the three main advantages of choosing composites. Compared to steel and aluminium and based on density, composites have a superior stiffness-to-weight ratio. Given the same strength they are lighter than steel by 80% and aluminium by 60%. Many composites withstand continuous high operating temperatures up to 250˚C (482°F), and are highly resistant to corrosion.

The non-reactive nature of many resins and reinforcements can be custom-selected thereby resisting decomposition and degradation in chemically corrosive environments.

Durability is also a plus – well-designed composites have exhibited apparent infinite life characteristics, even in extreme environments.

Economically they make more sense. Composites offer designers an increasing array of choices through the vast range of materials on offer. The trend to use composites is highly favourable, especially when comparing the cost of fabrication. Our process allows the formation of a component in a single pressing, guaranteeing repeatability and consistency. This combined with lower initial start up costs and durability makes composites the right choice for many applications.

Improved safety.
On worksites, the electrical insulating properties of composites are inherent (depending on reinforcement selected). Alternatively, composites can be made to conductor selectively conduct electricity. Tunable energy management characteristics, with high-energy absorption or high-energy conductivity, are also possible. Made to Measure thermal expansion properties can be compounded to closely match surrounding structures to minimize thermal stresses. Composites have such exceptional shaping and forming properties they are more comparable to the proverbial ‘putty’. They can be made to almost any shape during fabrication. The composites’ inherent shaping and forming characteristics allow production to be established for a fraction of the cost that would be required in a metallic fabrication. Even in extremely harsh environments, well-designed composites have shown such infinite life characteristics they may well last an eternity.

Looking for more service about plastic injection molding and composite moulding service, please go to https://www.hao-mold.com/.

THE VENUE

  • Exhibition & Convention Area: 102,000 sq. mts.
  • Spread over 45 acres
  • 15 Exhibition Halls
  • High load bearing floor capacity of 10 Tons / sq. mts –
  • Ideal for live demonstration of heavy machinery
  • Exhibition hall’s towering ceiling height – 7 to 18 meters.
  • Can be converted into double storey booths
  • 10,000 car parking and over 500 trees
  • Inbuilt Media Lounge, Protocol Lounge & Control Room

ABOUT INDIA PLAST

INDIA PLAST 2015 is a global congregation of plastic industry. An Exhibition conceived and promoted by the Government of Gujarat, it will provide a dynamic interactive platform for everyone who matters in the plastic industry across the globe…manufacturers, suppliers, innovators, technologists, consultants, investors, customers.

The Exhibition will showcase the latest technological developments in the field. It will also offer a world of exciting global technological know-how, consulting and joint venture opportunities. The focus will be on exploration, innovation, expansion and co-operation.

AIM

INDIA PLAST 2015 will focus on promoting a progressive image of Indian plastic industry on a global platform. It will act as a catalyst and facilitator for buyers and sellers, bringing together the entire global plastic fraternity. It will help the Indian industry imbibe the latest plastic molding technologies even while showcasing their achievements to the world. It will provide an ideal opportunity to network with industry peers and thought-leaders and expand industry in every sphere.

EVENT SCHEDULE

Raw Space : 27-01-2015 (Time : 10 am to 6 pm)

Shell type : 28-01-2015 (Time : 10 am to 6 pm)

After official closing of exhibition (03-02-2015, 5 pm to 04-02-2015 before 11:00 am)

Move Out Time : 03-02-2015 (Time : 07 pm)

  • Deadline to complete exhibit transfer and stall decoration before 9 pm on 28-01-2015
  • Transfer of material/goods will not be allowed during exhibition

IMPORTANT DATES

  • Exhibitor’s product profile for participant directory : 30-11-2014
  • For final payment : 30-11-2014
  • To submit additional service requirement form :30-11-2014
  • Specification of loading/unloading : 30-11-2014

PARTICIPATION COST

Upto 30th April 2014After 30th April 2014
Shell Package
(per sq mtr)
Raw Space 
(per sq mtr)
Small scale (SME)Rs 4500/-Rs 4000/-ForeignUSD 125USD 120Corporate / Govt.Rs 11000/-Rs 10000/-
Shell Package
(per sq mtr)
Raw Space
(per sq mtr)
Rs 5400/-Rs 4800/-USD 140USD 135Rs 13200/-Rs 12000/-

(12.36% Service Tax will be applicable on above charges)

  • 2 side open 15% extra
  • 3 side open 25% extra
  • 4 side open 30% extra

STANDARD FACILITIES

Carpet Floored Constructed stall with Exhibitor’s Name on Facia, One Laminated Table, One Dust bin, Three Spot lights, One 5 Amp. Plug Socket for every stall of size 9 sq.mtr. + 500 nos. of Invitation Cards, One Exhibiton Souvenir, Three Exhibitor Badges, One entry in participant directory.

INDOOR BARE SPACE

this comprises of bare space only. (Exhibitors will have to construct their own designed stall.)

FACILITY & FEATURES

INDIA PLAST 2015 is going to be held at Mahatma Mandir Exhibition & Convention Centre, which is designed with state of the art technology and infrastructure.

  • Inbuilt media lounge
  • Protocol lounge & Control room
  • Large parking area for over 10000 cars with elegant exterior design
  • High load bearing floor capacity for heavy machinery

THE GUJARAT ADVANTAGE

  • 13 Special Investment Regions of more than 100 sq kms each being planned
  • 38% ( more than 500 kms) of the planned Delhi Mumbai Industrial Corridor (DMIC) & Dedicated Freight Corridor (DFC) passing through Gujarat
  • Knowledge Corridor & Integrated Townships
  • Gujarat International Finance Tec-City – India’s first Special Economic zone (SEZ) for International Financial Services
  • Round-the-clock uninterrupted power supply throughout the state
  • The only Indian state with an integrated 2400 kms state-wide gas grid
  • State with the highest number of ports and airports
  • 1600 KMS COASTLINE – Offers numerous opportunities for port based industries
  • An annual growth of more than 15%, with more than 70% of polymers being produced in the state
  • As a Special Economic Zone (SEZ), Gujarat facilitates foreign direct investment with ease
  • It contributes around 25% to India’s overall exports and 37% of Indian port cargo
  • Gujarat has been ranked 1st as per the “Economic Freedom Rankings for the States of India”

LOCATION ADVANTAGE

  • 20 kms from Ahmedabad International Airport – direct international flight connectivity to cities across Europe, Middles East, South East Asia and America.
  • 28 kms from Ahmedabad Railway Station – very well connected to all major cities of India
  • Near proposed Metro & BRTS Routes
  • Proximity to all major Entertainment & Recreational facilities
  • Direct connectivity to all major tourist routes
  • Accommodation– More than 2500 rooms in 5 & 4 Star hotels and additional 5000 rooms in budget hotels.
  • Accessibility: Many organized cab services alognwith individual & local cab operators available, helps a visitor to reach the destination easily.
  • Requisite facilities by Exhibitors and Visitors will be facilitate by the organiser.

THE INDIA ADVANTAGE

Tomorrow

  • With more than 1 billion citizens, India is the second most populous nation in the world.
  • Has the highest number of billionaires in Asia & fourth highest in the world
  • One of the world’s fastest growing wealth creators, thanks to its knowledge economy and its vast manufacturing and agriculture industry.
  • 50 out of the top 100 of fortune 500 companies are present in India
  • Joined the elite club of 12 countries with a trillion dollar economy.
  • India has emerged as one of the most attractive investment destinations

Opportunities

  • The Indian plastics industry made a promising beginning in 1957 with the production of polystyrene
  • Today in India there are about 30000 plastic processing units and 150 plastic processing machinery manufacturers in india
  • The per capita consumption of plastic products in India is growing at 13% CAGR for last decade
  • The Indian Plastics Industry has been growing at a rate of 12% ,it is all set to reach the 12.5 MMT by consumption making India the 3rd largest consumer of plastics